CNC Machines

CNC Turning Centers
CNC VERTICAL MACHINING CENTERS
CNC Mini Milling Machines
CNC Mini Lathe Machine: 100V CNC

CNC Trainer Milling Machines


  • Table size: 420 x 180 mm
  • Travel X,Y, Z: 200 / 125 / 200 mm
  • Spindle Head / Taper: 90 deg. / ISO 30 / BT 30
  • Spindle Center line to column: 155 mm or more
  • Spindle motor speed range: AC/PMDC 400W/ 0-3000 RPM
  • Feed / Rapid Rate: 1-750 / 750-1000 mm/min or more
  • Tool Change: Manually 8 Nos. CNC Prompting
  • ATC (Optional): 6 / 8 Stations
  • CNC System: FANUC/SIEMENS
  • No. of axes / Drive / Resolution: 3/Stepper / Servo / 0.01 / 0.005 / 0.001 mm
  • Spindle nose to table top: 25-225 mm
  • Spindle centre (horz) table: 114 - 314 mm
  • Positioning accuracy :± 0.02
  • Manual feed with jog(mm): 0.01, 0.1, 1.0, 10 all axes

CNC Trainer Lathe Machine: CMT -MACHINEX 100V CNC


  • Centre Height 75-100 mm
  • Swing over bed / Cross slide 150 / 75 mm
  • Travel of Cross slide 75 mm
  • Head stock spindle bore 16 mm
  • Spindle taper / Speed range MT-2 / 0-3500 RPM
  • Tail stock sleeve dia. 22 mm
  • Tail stock taper / stroke MT-1/MT-2 / 42 mm
  • Type of drive / Resolution Stepper /Servo / 0.01 / 0.005 / 0.001 mm
  • CNC System FANUC/SIEMENS/PC Controlled
  • Feed / Rapid rate 1-750 / 750-1000 mm or more
  • Main spindle drive PMDC/AC 1HP, stepless variation
  • Manual feed with jog(mm) 0.01, 0.1, 1.0, 10 both axes

CNC Turning Centers

Rigid bed made of high quality graded cast iron and stress relieved Specially designed cartridge type spindle with minimum heat distortion Main spindle bearings lubricated and sealed for life AC Servo motors directly coupled to the C3 or better class ball screws Preloaded antifriction LM guides or hardened guide ways with Turcite coating for all sliding components for faster and more accurate positioning 8 or 12 station tool turret Automatic centralized lubrication Rear splash guard and sliding front chip guard door.

CNC VERTICAL MACHINING CENTERS

Heavily ribbed bed made of high quality graded cast iron and stress relieved. Specially designed Thermally symmetrical headstock for better heat dissipation. AC Servo motors directly coupled to the C3 or better class ball screws. Preloaded antifriction LM guides or hardened guide ways with Turcite coating for all sliding components for faster and more accurate positioning Absolute encoder feedback for all axes Automatic centralized lubrication Bearings lubricated and sealed for life. Easily accessible work areas for maximum operating and service efficiency. Fully enclosed splash guard